Exposure 3010S2 Models
3010S2 CD Player
The 3010S2 CD Player features a custom-made CD transport, servo unit and control mechanisms, as well as twin Burr-Brown PCM 1704 mono 24 true multi-bit DACs.
As well as
highly optimized audio circuitry with discrete output stage and multiple
stages of regulation and a large toroidal power transformer with separate windings for
the CD transport and
audio stages. A high stability crystal clock reference and dedicated
power supply regulator for the transport and audio stages ensure very
low jitter. The result is an incredibly high resolution CD player with a
smooth natural tonal balance.
3010S2 Integrated Amplifier
3010S2 Integrated Amplifier delivers 110 watts into 8 ohms, offers six
line inputs, an optional MM or MC phono card, bi-wiring compatibility
and high quality relays used for input source selection.
It features a separate pre-amp output with class A buffer stage, high
quality capacitors used in the signal path, uniquely tuned short signal
and power supply path PCB, Cascode circuitry for improved power supply
immunity and a fast bipolar transistor output stage for dynamic and
Pre-Amplifier kicks the performance up a notch with a large custom made
toroidal power transformer and smoothing capacitors for the power
supply, high quality relays used for input source selection, audio
output stages utilizing discrete transistor class A output buffer. Six line inputs or five plus the optional phono
are offered plus two main out (RCA)
and one tape output. Based on Exposure's highly regarded Classic 35
pre-amplifier this new pre-amp will get you closer to the music.
3010S2 Stereo Amplifier
110 watts per channel into 8 ohms, the 3010S2 Stereo Amplifier is ideal
for driving difficult speaker loads either by itself or especially when
bi-amped with the 3010S2 Integrated Amplifier. With high capacity
custom made toroidal power transformer and power supply capacitors, and
high quality capacitors used in the signal path, the 3010S2 amplifier
delivers a clean and extended low frequency performance.
3010S2 Mono Amplifier
on Exposure's stunning MCX monoblocks, the
3010S2 Mono Amplifiers deliver the ultimate performance. Features
include a large
custom made toroidal transformer and smoothing capacitors for the power
supply, all bipolar transistor design using carefully selected parts, DC
coupled throughout, electronic, non-invasive overload protection circuit
and thermal trip and bi-wire speaker outputs using high quality shrouded
sockets. The monoblocks deliver 100 watts into 8 ohms with a class
leading SN ratio of >110dB!
All Exposure 3010S2 products include high quality all-aluminum
casework and extruded front panel to control resonance and stray
electromagnetic fields, a full function remote control and a three year
warranty. All Exposure integrated amplifiers and pre-amplifiers can be
fitted with a high quality plug in MM or MC phono card. All models are
available in silver finish with blue display and LEDs, or black finish
with red display and LEDs.